HARRISBURG — The Pennsylvania Department of Transportation launched a new public awareness campaign aimed at helping drivers avoid hitting low bridges with vehicles.

The “Check Your Height, Know It’s Right” campaign – announced as part of a multi-state collaboration – encourages motorists to know their vehicle height and check that it will safely fit under bridges on their route. Vehicle strikes to the tops or sides of bridges, commonly known as bridge hits, damage vehicles and infrastructure, cause traffic delays, and put the public and emergency responders at risk.

According to PennDOT data, in the 10 years between 2013 and 2023, there were more than 600 strikes to bridges or other overhead structures in PA.

“Pennsylvania has made tremendous progress on improving our bridges, and through Governor Shapiro’s budget investments we can advance even more repairs. Each of these bridge strikes take funding away from other projects and often involve resources from our emergency response partners,” said PennDOT Secretary Mike Carroll.

In Pennsylvania, vehicles and loads taller than 13 feet 6 inches must apply for a Special Hauling Permit. All bridges with a vertical clearance less than 14 feet 6 inches are signed with low-clearance warnings, both at the bridge and in advance of the structure. Drivers should always watch for and adhere to signage indicating bridge heights and not rely solely on navigation devices which do not consider vehicle height when giving route guidance.

The “Check Your Height, Know It’s Right” campaign will involve public and industry outreach targeting commercial driver’s license holders and non-commercial drivers operating commercial trucks, leased trucks (such as delivery and moving box-type trucks), and recreational vehicles. Crash data shows that drivers may not always consider vehicle height and related restrictions during operation. For example, a typical 26-foot moving/delivery truck may have a height ranging from 11 feet to 13 feet 6 inches. The campaign also reminds drivers to lower truck beds and check the height of equipment they’re hauling.

Drivers are responsible for knowing the height of their vehicle – whether a personal vehicle or a rented one – and observing and complying with posted bridge heights. Pennsylvania motorists can use 511PA to check their route for low-clearance bridges (less than 13 feet 6 inches) using the “Low Bridge” map layer. When the map layer is on, low bridges are indicated with a bridge icon that users can click for more information about the location.

Where possible, PennDOT and other bridge owners increase the vertical clearance under bridges during rehabilitation and reconstruction projects to reduce the chances of strikes. Over the past 10 years, more than 160 bridges with 16 feet, 5 inches or less of vertical clearance were raised by at least 3 inches during replacement.